Other Topic Library Versions

Adding a K2 client

  • You must be logged in to the K2Config application with permissions equivalent to K2 administrator or higher.
  • The K2 SAN must have adequate bandwidth available to meet the bandwidth needs of the K2 client you are adding.
  • The devices of the K2 SAN are not required to be offline, and a restart of devices is not required.
  • The K2 client must be connected to appropriate networks and be powered up.
  1. In SiteConfig, add the K2 client to the SAN as follows:
    1. In the Network Configuration tree view, add the client as a placeholder device next to existing clients.
    2. Discover devices.
    3. Identify the K2 client you are adding.
    4. Assign the discovered K2 client to placeholder K2 client.
    5. Verify that networks are assigned and planned network interface settings applied.
  2. In the K2Config application tree view, select the name of the K2 SAN, which is the top node of the storage system tree.
  3. Click Add Device. The Add Device dialog box opens.
  4. Select the appropriate type of client.
  5. Click OK. The new client device appears in the tree view.
  6. Configure the K2 client as appropriate.

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 10.1.2 gvtp_20191213_00:21:37