Other Topic Library Versions

Disabling a disk

  1. In the tree view, right-click the disk and select Advanced | Disable and OK to confirm. A message “The drive is spinning down…Please wait” appears. If internal storage, the Service LED on the K2 system displays a flashing yellow pattern three time a second.
  2. When the message “Operation succeeded…now safe to remove disk” appears, click OK.
  3. The Storage Utility displays red Xs on tree view icons to represent a disk fault and a degraded LUN.

    Note: On the K2 Media Client, remember that the LUN 0 (disks 0_0 and 0_1) is the system drive. Do not attempt disk operations on the system drive.

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 10.1.2 gvtp_20191213_00:21:37