Install the NEC M110 shared storage into the threaded rail rack
Follow this procedure to install the M110 chassis into the 19 inch 10-32 threaded rail rack.
- Read the stickers on the rack slide from NEC. Use the "T" bracket for the 19 inch 10-32 threaded rail rack. Use the bracket for both the left and right rack slides.
- Loosen the screws to allow the rack slide to expand to the proper depth of the threaded rails.
- Attach the "T" bracket to the rack slide and the rack bracket.
- Sandwich the 10-32 threaded rail both in the front and back of the rack.
- Tighten the screws used to expand the rail to the proper depth.
- Install the 10-32 screws into the front and back of the rack slide. Use the bottom screw hole of the top rack unit and the middle screw hole of the bottom rack unit.