Configuring video reference standard settings

The video reference standard setting is global to the K2 Summit system and applies to all channels. For the reference standard currently selected, the only clips available for playout are those that use that reference standard. Clips that use a different reference standard are disabled (grayed out).

Note: When you change the video reference standard setting, a restart is required to put the change into effect.

In AppCenter, open the Configuration Manager.
Click System.

Configure settings as follows:

For this setting...	Configure as needed...
Reference Standard	Choose NTSC or PAL.
	Determine status of Reference present. Green LED — source present Black LED — source not present
	Determine status of Reference locked. Green LED — system locked Black LED — system not locked