Install the Fibre Channel card driver

If the K2 Summit system is on a redundant K2 SAN or is connected to direct-connect storage, MPIO software must be installed.

If your K2 Summit system has the optional Fibre Channel card, the driver for the Fibre Channel card is not installed on the recovery image provided by Grass Valley for that K2 Summit system. Therefore, after restoring the image, you must install the Fibre Channel card driver.

A K2 Summit system can have one of the following types of Fibre Channel cards:
  • LSI
  • ATTO
Depending on the type of Fibre Channel card in the K2 Summit system, do the appropriate task from this section to install the Fibre Channel card driver.

Copyright © 2020 Grass Valley Canada. All rights reserved. Specifications subject to change without notice. K2 Summit 10.1.3 gvtp_20200819_01:49:13