Replace CPU carrier module

Do this task if installing K2-XDP2-CPU-FK on a K2 Summit system.
  1. Shutdown the K2 Summit system.
  2. Disconnect all power cables from the K2 Summit system.
  3. Press the power button on the K2 Summit system to drain off power from boards.
  4. Remove any cables connected to the CPU carrier module.
  5. Replace the current CPU carrier module with the new CPU carrier module.
  6. Reconnect cables to the CPU carrier module.
  7. Reconnect power cables.
Next, do one of the following:
  • If you are installing K2-XDP2-V10-FK on a K2 Summit 3G system with mSATA system drive, skip ahead and reimage.
  • If you are installing K2-XDP2-V10-FK on a K2 Summit system with CompactFlash system drive, replace the CompactFlash boot media with the new larger 64GB mSATA system drive.
Parent topic: Installing software and CPU carrier module upgrades
Related topics:
Carrier module removal

Copyright © 2020 Grass Valley Canada. All rights reserved. Specifications subject to change without notice. K2 Summit 10.1.3 gvtp_20200819_01:49:13