Configuring reference file type on a K2 SAN system
- In the K2Config application, for the K2 Media Server with role of file system server, access the File System Server Configuration page as follows:
- On the File System Server Configuration page select one of the following:
- Click Check to apply the setting.
-
Manage the required K2 Media Server restart as follows:
- On a SAN that is already configured, you must restart the K2 Media Server to put the change into effect. Follow the restart procedure appropriate for the basic or redundant K2 SAN.
- On a SAN that is not yet fully configured, continue to work through the Configure K2 Server wizard. The restart at the end of the configuration process is sufficient.