GPI Output
On the GPI tab, select GPI-Output… | Make settings as needed… | ||
---|---|---|---|
GPI Output 1. . . GPI Output 12 | Channel | C1, C2, C3, C4 | Select the channel on which to trigger the GPI Output. |
GPI Output 1. . . GPI Output 12 | Active | High
Low |
Select the active signal (high or low) required. This is determined by the external equipment connected to the GPI Output. |
GPI Output 1. . . GPI Output 12 | Control
(This menu and the items on it are part of the licensable AppCenter Pro option) |
Application
Position trigger Channel state |
Determines whether the GPI output is triggered by the application (e.g., by the Properties dialog box in Playlist), the position (e.g. at the beginning or end of a clip) or the state of the selected channel (e.g. playing, recording, idle, etc.) |
GPI Output 1. . . GPI Output 12 | Trigger name
(Available when Application selected) |
GPI-Out-X | Enter the name of the action triggered by the GPI output. |
GPI Output 1. . . GPI Output 12 | Trigger at (Available when Position trigger selected) | Start of material
End of material Start of material plus End of material minus |
When Start/End of material plus/minus offset appears |
GPI Output 1. . . GPI Output 12 | Activate when
(Available when Channel state selected) |
Playing
Recording Cued for play Cued for record Idle |
Once a channel has been selected, this setting triggers the GPI output when the channel is in the specified state. |