Configure live streaming multicast
- In AppCenter, click System | Configuration. Configuration Manager opens.
-
In Configuration Manager, click the
System tab.
These settings apply to all channels on the K2 Summit system.
- In Proxy Setup settings, select and enter the Multicast port base. This is the first UDP port address for elementary streams.
- To set the multicast IP base address for each channel independently, set Manual live stream IP address config to Yes.
-
Select Multicast
IP base (x.y.0.0).
The K2 Summit system applies channel-specific IP addresses from this base.
- Enter the IP address in the Multicast IP base (x.y.0.0) dialog box.
- Click OK.
- Click OK to apply the settings.