Compatible GigE switch components
Components that reside on the HP ProCurve 3400cl series, HP ProCurve 29xx series, and Dell EMC Networking N15xx series GigE switch are compatible with this release of K2 software as follows:
| Product | Version | Comments |
|---|---|---|
| Dell EMC Networking N1524 series firmware | 6.6.2.5 | This version includes a GV patch for the issue
below: Intermittent ping loss to switch causing video application to fail over [FIELD-4870, CS00010237720] |
| Dell EMC Networking N1548 series firmware | 6.6.2.5 | This version includes a GV patch for the issue
below: Intermittent ping loss to switch causing video application to fail over [FIELD-4870, CS00010237720] |
| HP ProCurve 2920 series firmware | WB.15.13 or higher | Check with the manufacturer for firmware updates. |
| HP ProCurve 2910al series firmware | W.15.08.0012 | - |
| HP ProCurve 2900 series firmware | T.11.12 | This older version is no longer recommended. |
| T.13.23 | Upgrade to this version is required. After upgrade, configure QOS settings. | |
| HP ProCurve 3400cl series firmware | M.08.66 | This older version is still compatible |
| M.08.86 | Upgrade to this version is recommended |
Note: Dell EMC Networking N3132PX-ON/N2128PX-ON/N3000E-ON / N3200 / N2200 / N2000 /
N1500 / N1100-ON Series switches do not support firmware version 6.6.2.0 /
6.6.2.30 and that release has been pulled out from the support site. Upgrading
N2000 and N3000E-ON switches to firmware version 6.6.2.0 / 6.6.2.30 and then
updating CPLD with that version may result in an inoperable switch. It is
recommended to download and upgrade N-Series switches to 6.6.2.5 / 6.6.2.35 and
later firmware version.