Upgrading K2 systems
This section contains the tasks necessary for a software-only upgrade on standalone and SAN K2 systems. A software-only upgrade is an upgrade that does not require re-imaging or the installation of any hardware.
Do not do the tasks in this section if the system you want to
upgrade is not supported for software-only upgrade, as follows:
- A K2 Summit 3G system currently at a 9.x version
- A first generation K2 Summit system currently at a 7.x version or a 8.x version
- A K2 Media Server or GV STRATUS server with a disk image version lower than 10.x.
- A K2 Media Server or GV STRATUS server with a version 10.x or higher disk image and you require the Embedded Security solution on the server.
Do the tasks in this section if the system you want to upgrade is supported
for software-only upgrade, as follows:
- A K2 Summit 3G systems currently at a 10.x version of K2 software.
- A K2 Media Server or GV STRATUS server with a version 10.x or higher disk image, if you do not require the Embedded Security solution on the server.