Add software package to deployment group for K2 devices

  • The SiteConfig control point PC must have access to the software package file.
  • The K2 Media Servers and K2 clients to which you are deploying software must be in a deployment group.
Use the following procedure to add one or more software packages to the deployment group that contains your K2 devices. For this release of K2 software, identify and add software installation files as follows:
Software File name
K2 Server software for 64-bit systems GrassValleyK2Server_x64_10.1.x.xxxx.cab
SNFS software for 64-bit systems SNFS_x64_6.0.6.75382-14.cab
K2 client software GrassValleyK2SummitSANClient_10.1.x.xxxx.cab
SNFS software for K2 clients SNFS_Summit_6.0.6.75382-14.cab
Control Point PC software GrassValleyControlPoint_10.1.x.xxxx.cab

You can add files for both 32 bit and 64 bit systems because when SiteConfig deploys software it automatically deploys the 32 bit or 64 bit software appropriate for the target device.

  1. In the Software Deployment | Deployment Groups tree view, select a deployment group.
  2. Click the Add button. The Add Package(s) dialog box opens.
  3. Do one of the following to select the software package:
    • Select from the list of packages then click OK.
    • Click Browse, browse to and select the package, then click Open.
  4. If one or more EULAs are displayed, accept them to proceed. If you do not accept a EULA, the associated software is not assigned to the deployment group. SiteConfig adds the package to the deployment group.

The package appears in the Managed Packages list for the selected deployment group. SiteConfig creates new software deployment tasks for the package and displays them in the Tasks list view.


Copyright © 2020 Grass Valley Canada. All rights reserved. Specifications subject to change without notice. K2 Summit 10.1.3 gvtp_20200819_01:49:13