- The device must be assigned in
the SiteConfig system description and network connectivity must be present.
- SiteConfig must be able to log
in to the device using the username/password credentials assigned to the device.
- The SiteConfig PC must not have
a network drive mapped to an administrative share (such as C$) on a device on
which you are checking software.
Do the following steps on all K2
devices that you are upgrading.
-
In the
Software
Deployment | Deployment Groups tree view, right-click the top-most
node for the group or any individual device and select
Check
Software.
Note: If you have access
problems, verify that the administrator account on the device has
credentials as currently configured in SiteConfig.
Note: If an "Unable to copy ... to
target" error appears for a device that has the Grass Valley Embedded Security
solution, apply the
Embedded Security solution
one-time initial deployment process to the device. After the one-time process is
complete the error does not appear and it is no longer necessary to put
Embedded Security in Update mode.
The Check
Software dialog box appears. SiteConfig searches for software on the selected
device or devices and gathers information. Progress is reported.
-
When the check is
complete, close the Check Software dialog box.
An updated list of all
currently installed software is displayed in the
Software
Deployment | Devices | Installed Software list view. If software is
a SiteConfig managed software package, information is displayed in the Managed
Package and Deployment Group columns.