-
On the PC that hosts K2Config, open the
K2Config
application.
A log on dialog box opens.
-
Log
on to the K2Config application with the
administrator account.
The
K2Config
application opens.
-
In the
K2Config
application tree view, verify that the K2 SAN has the correct number of
clients, according to your system design.
If the correct number of clients is not currently added to the
K2 SAN, you can add or remove clients now (before clients are configured), as
follows:
- To add a client,
select the top node of the storage system and click the
Add Device button.
- To remove a
client, select an unconfigured client and click the
Remove button.
-
In the
K2Config
application tree view, select the system you are adding to the K2 SAN.
-
Select a client and click the
Configure button.
The configuration wizard opens to page 1.
Additional configuration changes for GV I/O client may be needed in later releases.
Currently, add the client as GV I/O Live Ingest & Playback device and configure
it as you would a K2 Summit client. GV I/O supports either LAN Connect or iSCSI
connection.
Note:
If your
system has a large number of iSCSI
or LAN Connect
clients, you are prompted to restart the server that has the role of SNFS file
system server when you configure clients and cross the following thresholds: 64
clients; 80 clients; 96 clients.