Get K2 10Gv2 RAID controller logs
The K2 10Gv2 RAID
controller(s) must be connected to the control network and must have IP address(es) set (using
Storage Utility) to support the operations in this topic.
- In the Storage Utility tree view, select the controller.
- Click Actions | Get Controller Logs. The Login Information dialog box opens.
- If necessary, enable fields and enter username, password, or controller IP address, then click OK. The Gather Logs wizard opens.
- At each wizard page, read messages in the center window to follow progress and wait until the green indicator verifies that operations are complete. Then click Next to proceed.
- A message informs you of that logs have been successfully gathered.
- Find the log files on the K2 Media Sever at C:\logs.
