-
Enter the name for the K2 Media Server, as currently configured on
the machine.
-
Enter the name or IP address of the Ethernet switch, as currently
configured on the switch, to which the K2 Media Server is connected.
-
Select your server roles, and select either one of the option
below if not automatically selected for your operation.
- iSCSI bridge
- SNFS LAN Gateway
Note: If the K2 SAN has one or more optional NH servers, then FTP traffic
should go to the NH server, not the K2 Media Server you are now
configuring. In this case, do not select the FTP server role or the NAS
server role.
-
Click
Next.
The Software Configuration page opens.