About system messages

The following messages are displayed to indicate system status:

  • Normal BIOS messages — These messages can be observed on a locally connected VGA monitor during normal startup processes.
  • BIOS POST error messages — If there is a problem these messages are displayed on a locally connected VGA monitor. During the Power On Self Test (POST), the BIOS checks for problems and displays these messages.
  • AppCenter startup messages — As AppCenter opens the system determines if health is adequate by checking critical subsystems. A dialog box is displayed that indicates progress and displays messages.
  • Status bar and StatusPane messages — During normal operation AppCenter displays system status messages on the status bar. From the status bar you can open the StatusPane to see both current and previous messages. You can observe these messages in AppCenter on a locally connected VGA monitor or on a network connected control point PC.
  • Storage Utility messages — While you are using Storage Utility, pop-up message boxes inform you of the current status of the storage system.

Copyright © 2020 Grass Valley Canada. All rights reserved. Specifications subject to change without notice. K2 Summit 10.1.3 gvtp_20200819_01:49:13