Disable Large Send Offloads

  1. From the Windows operating Start menu, open Control Panel.
  2. In Control Panel, open Network and Internet and Network and Sharing Center .
  3. In Network and Sharing Center, select Change adapter settings. Network Connections opens and displays network adapters, including the following:
    • Control Connection #1
    • Control Connection #2
    • Media Connection #1
    • Media Connection #2
  4. For each Control Connection and each Media Connection, do the following:
    1. Right-click the connection and select Properties. The Connection Properties dialog box opens.
    2. In the Connection Properties dialog box, click Configure. The Adapter Properties dialog box opens.
    3. In the Adapter Properties dialog box, click the Advanced tab.
    4. On the Advanced tab, in the Settings list select Large Send Offload v2 (IPv4) and then in the Value drop-down list select Disabled.
    5. Click OK to save settings and close.
    6. Repeat these steps for each Control Connection and each Media Connection.
Next, disable CPU power technology.

Copyright © 2020 Grass Valley Canada. All rights reserved. Specifications subject to change without notice. K2 Summit 10.1.3 gvtp_20200819_01:49:13