Forcing a disk to rebuild
With RAID 0 there is no RAID redundancy, so disks do not rebuild. With other RAID types, such as RAID 1, if media access (record/play) is underway, when you insert a media disk it automatically begins to rebuild. If there is no media access underway, to start the rebuild process either begin a media operation or use the following procedure:
- In the tree view, identify the faulty disk . If the disk is not currently in the fault state, the Rebuild option is not available.
- In the tree view, right-click the faulty disk and select Rebuild.
- When the message “Succeeded to start rebuild…” appears, click OK. If internal storage, the Service LED on the K2 system displays a flashing pattern alternating yellow/green once a second.