Timecode problems
For the corrective actions in this section, refer to related topics in
the "Using K2 AppCenter" section of the K2
Topic Library for detailed instructions.
Problem | Possible Causes | Corrective Actions |
---|---|---|
Recorded timecode reads xx.xx.xx.xx. | During recording, the channel had no timecode source. | Check that you have the right record channel timecode source selected, verify that timecode is present in the source, and record the clip again. You can also stripe the timecode on an existing clip. |
A clip shows no mark-in/mark-out timecode, the current timecode display shows XX:XX:XX:XX, or the last valid timecode is displayed. | The selected timecode source was missing or intermittent during recording. |