Setting Time Zones Using the timezonename mode on the Brocade switch
The first procedure requires you to select the actual time zone. The following procedure describes how to set the current time zone to Central Standard time using timezonename mode.
- Log in to the switch using the default password (which is password).
-
Enter the tsTimeZone command as follows:
Use timezonename to set the time zone by time zone ID, such as PST or Country/City.
The following example shows how to change the time zone to US/Central. The tsTimeZone command by itself displays the current time zone.
switch:admin> tstimezone
Time Zone : US/Pacific
switch:admin> tstimezone US/Central
switch:admin> tstimezone
Time Zone : US/Central