Configuring record channel video settings
Video record compression settings are not global; they can be set on a
channel by channel basis.
CAUTION:
When using a K2 Summit SAN-attached system with shared storage, bear in mind that any
configuration changes that result in an increased bandwidth (such as increasing
the bit rate, media formats, and ratio of record channels to play channels)
affect load balancing. Therefore, if you change your intended use of a K2 Summit SAN-attached system and increase its
bandwidth requirements, you risk losing media access. For a more detailed
description of load balancing, see the "Installing and Servicing the K2 SAN" section of the
K2 Topic Library.
- If you are using a channel suite with channels from multiple sources, select a channel from the K2 Summit system that you want to configure.
- In AppCenter, click System | Configuration. Configuration Manager opens.
- Click Channel, and select a channel.
-
Configure settings as follows: