Adding media to your Final Cut Pro project
- Locate and select the media to add to your project.
-
Select the method for
adding the media to your project.
- Add reference clips and sequence — Select to add the associated assets to the Final Cut Pro project.
- Edit in place – Use this method to add a clip to the bin without moving the media. With this method you are playing and editing the clip over the network. This is the preferred method on a shared storage system such as a K2 SAN.
- Transfer
Locally – Use this method to transfer the media corresponding to the clip to
your desired location. This is the preferred method if your editor is
connected via SMB to a stand-alone K2 client. Depending on clip size, the
transfer can take a significant amount of time. Wait until the cursor no
longer indicates that the operation is in progress before proceeding. Note: Do not add media to a project if the transfer is still underway.
- Click Add to Project. The media is added to your Final Cut Pro project.
- To return to Final Cut Pro, close the GV Connect plug-in.