Install codec module upgrade
Before installing a codec module upgrade, the K2 Summit system must have either Type II, Type III or Type IV CPU carrier module, 16 GB system drive, 16 GB or 32 GB USB Recovery Flash Drive, and K2 software version 9.x or higher.
This section provides instructions for the following field kit:
Upgrade Nomenclature | Description |
---|---|
K2-XDP2-3G-FK | K2 Summit Production Client XDP Series 3G SDI Interface field kit for K2-XDP series platforms. Includes 2ea - 3G codec modules, 2 - ea. 550W power supplies, and installation instructions. NOTE: This kit cannot be used with K2-XDT Series Summit Transmission Clients and Servers or K2-SOLO models. |
CAUTION:
This system contains board-level components
that must be protected from static discharge and physical shock. Wear a wrist strap
grounded to the system chassis when handling system components.
Work through the task in this section.