Restore settings after generic reimage
Do this task for both software and CPU carrier module upgrade kits.
Settings must be saved using psave.bat before reimaging the K2 Summit system, and the reimage (Acronis) process must be complete.
Note: Do not attempt to use a single Recovery Flash Drive on multiple systems. This can
overwrite saved settings and lose the ability to restore settings on one or more
systems. Also, software licensing requires one Recovery Flash Drive for each
system.
- If you have not already done so, start up the K2 Summit system and log on with administrator privileges.
- Connect the USB Recovery Flash Drive to a USB port on the K2 Summit system.
-
From the USB Recovery Flash Drive, run the
following and wait for the process to complete:
Tools\SaveRestoreScripts\prestore.bat