On the K2 Summit system, Embedded Security must not be in Update Mode. Embedded
Security Manager must report Enabled.
When the K2 Summit 3G system is
fully configured, licensed, and operational, create a disk image and store it on
the USB Recovery Flash Drive. Refer to the K2 product's service procedures.
Disconnect the USB Recovery Flash Drive and store it in the front
bezel assembly.
The upgrade process is complete for the following upgrade kits:
K2-DYNOZOOM-FK
Refer to related topics in the "Using K2 Dyno S Replay Controller" section of the K2
Dyno Topic Library to configure and
use the DynoZoom system.