Front interconnect board

The front interconnect board has the control and speed monitoring circuit for the fans and incorporates a PCIE to dual USB 3.0 controller circuit. It hosts the boot media, standby switch, Power LED and Service LED. The LEDs are driven by circuitry on the carrier module. The front interconnect board is mounted in the front of the unit and plugs into the midplane board.


Copyright © 2005 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. K2 Summit 10.1.4 gvtp_20201103_00:48:25