Disk backplane unit removal

Before doing this task, remove the front bezel assembly, top cover, disk controller board, front interconnect board, and disk modules.

A screwdriver with a shaft at least 7 inches long is recommended. Use the following view of the disk backplane to help you locate screws.



To remove the disk backplane unit, proceed as illustrated.





Parent topic: Internal Parts Removal

Copyright © 2005 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. K2 Summit 10.1.4 gvtp_20201103_00:48:25