In the K2Config application, for the K2
Media Server with role of FTP server, access the FTP Server Configuration page
as follows:
On a SAN that is already configured, in the
tree view click FTP
Server.
On a SAN that is not yet fully configured,
work through the Configure K2 Server wizard until you reach the FTP Server
Configuration page.
On the FTP Server Configuration page select one of
the following:
377M: SMPTE ST 377:2004
compliant. Ensures compatibility with older products.
377-1: SMPTE ST
377-1:2009 compliant.
ARD and 377-1: ARD is
only for AVC-Intra Class 100 (720p and 1080i PAL only) and XDCAMHD-422
(1080i PAL only). For other formats, the clip will be set to 377-1 export
type if this option is selected.
Manage the required K2 Media Server restart as
follows:
On a SAN that is already configured, you
must restart the K2 Media Server to put the change into effect. Follow the
restart procedure appropriate for the basic or redundant K2 SAN.
On a SAN that is not yet fully configured,
continue to work through the Configure K2 Server wizard. The restart at the
end of the configuration process is sufficient.