Adding stand-alone K2 clients to the system description
The system description must
contain a group.
In the
Network
Configuration | Devices
tree view, right-click a group and select
Add
Device.
Configure settings for
the device you are adding as follows:
Family –
Select K2.
Type – Select
the appropriate type of K2 system.
Model – Select
the model with the appropriate storage.
Name – This is the device name, as
displayed in the SiteConfig device tree view and device list view. This name
can be different than the host name (network name). You can accept the
default name or enter a name of your choice. Devices in the tree view are
sorted alphabetically.
Amount – You can add multiple
devices, as currently defined by your settings in the Add Device dialog box.
An enumerator is added to the name to create a unique name for each device
added.
Control network– Select the control network.
Starting Address – Select
from the list of available addresses on the selected control network. If
adding multiple devices, this is the starting address, with addresses
assigned sequentially to each device added.
Click
OK to save settings
and close.
Repeat these steps for each of your stand-alone K2 clients.