Modifying stand-alone K2 client unassigned (unmanaged) interfaces
-
In the
Network
Configuration | Devices tree view, select a stand-alone K2 client
placeholder device.
The interfaces for that device are displayed in the interfaces list view.
Edit the control network interface first. - In the interfaces list view, right-click an interface and select Edit.
-
Configure the settings for the interface as follows:
- Click OK to save settings and close.
-
If you have a
FTP/streaming network, repeat these steps but select the stand-alone K2
client's other network interface and configure settings as follows.
- Click OK to save settings and close.
- Repeat this procedure for each of your stand-alone K2 client placeholder devices.