Harris settings
The Harris automation product uses VDCP protocol.
The following settings are required for the Harris automation product:
Setting | Mixed compression format playout | Same compression format playout | Comments |
---|---|---|---|
Disk Prerolls | 1 second | 10 frames | — |
Frames to send Play early (Preroll Play) | 1 second | 10 frames | These two settings should be the same as the Disk Prerolls setting. However, if there is extra fixed latency in your RS-422 communication path, you might need to adjust the settings differently. |
Frames to send Record early (Preroll Record) | 1 second | 10 frames | |
Disk Port Comm Timeout | 60 frames | 60 frames | This is the minimum required by K2. Do not use the Harris default value, which is 10. |
Back To Back Rec | Unchecked | Unchecked | K2 does not support this feature. |