RS-422 protocol control connections

You can control the K2 Summit system with remote control devices and software developed for the K2 system that use industry-standard serial protocols: AMP, BVW, and VDCP. (AMP protocols can also use Ethernet connections.) You can connect one RS-422 cable to each channel. Each RS-422 connection controls the channel to which it is connected only. Connect the RS-422 cabling as required, then refer to topics in the "Using K2 AppCenter" section of the K2 Topic Library to configure the K2 system for remote control.

Specifications for the RS-422 connection are as follows:

  • Data Terminal Equipment (DTE)
  • 38.4K Baud
  • 1 Start bit
  • 8 Data bits
  • 1 Parity bit
  • 1 Stop bit
Parent topic: Remote control protocols
Related topics:
Configuring a channel for remote control

Copyright © 2005 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. K2 Summit 10.1.4 gvtp_20201103_00:48:25