Configure GlobalSuperUser in SNFS default.cfg file on K2 Media Servers
In this task you open the media file system (SNFS) configuration file and verify/modify settings.
You can verify and, if necessary, modify the media file system (SNFS) configuration file and still keep your media file system intact if you carefully follow the steps in this procedure.
As an alternative to manually modifying the configuration file, if you need to make a new file system after upgrading K2 software, the required values are set automatically by the upgraded version of Storage Utility.
This task applies to the following devices:
- On a K2 Media Server, using Notepad, open the media file system (SNFS) configuration file: The configuration file can be either D:\SNFS\config\default.cfg. or D:\SNFS\config\gvfs_hostname.cfg, where hostname is the name of the primary file system server (FSM).
-
On a K2 Media Server,
verify, and if necessary modify, settings for required values as follows:
# ********************************************************* # A global section for defining file system-wide parameters # ********************************************************* GlobalSuperUser Yes . . . . . . InodeDeleteMax 1000 . BufferCacheSize 64M . . . . InodeCacheSize 32K . ReservedSpace No
- Close, and if necessary save, the SNFS configuration file.