You must be logged in to
the
K2Config
application with permissions equivalent to K2 administrator or higher.
The devices of the K2 SAN are not required to be offline,
and a restart of devices is not required.
In SiteConfig, add the client device to the appropriate group and
verify that it is communicating correctly on networks.
In the
K2Config
application tree view, select the name of the K2 SAN, which is the top node of
the storage system tree.
Click
Add Device. The Add Device dialog box opens.
Select the type of client you are adding.
Click
OK. The new client appears in the tree view.
Configure the client as appropriate. Refer to the documentation
for the device.
Enter the RVIO value as provided by Grass Valley. Do not attempt
to calculate the RVIO value on your own.
When configuring editors on a K2 SAN with 1 Gig TOEs, do not
assign editors and K2 clients (K2 Summit or K2 Media Client) to the same TOE.
Instead, assign editors to their own TOE.