Bringing a K2 SAN online

  1. Verify that RAID storage devices, Ethernet switches, and other supporting system are powered up. Refer to the section earlier in this manual for power on procedures.
  2. If K2 Media Servers are powered down, power them up. Refer to the section earlier in this manual for power on procedures.
  3. Place K2 Media servers in service. If you have redundant servers, make sure that you place primary/backup servers in service in the proper order.
  4. Power on all K2 clients and all generic clients.

Copyright © 2005 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. K2 Summit 10.1.4 gvtp_20201103_00:48:25