Configure Software Configuration page - Client

This page checks the client for required software.

  1. Click Check Software.

Figure 1. For K2 Client

Figure 2. For GV I/O Client

  1. If software with Yes in the Required column reports as Not Installed, install the software.
  2. When all required software reports as Installed, click Next.

The Network Configuration page opens.

Parent topic: Configuring a client for the K2 Storage System

Copyright © 2005 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. K2 Summit 10.1.4 gvtp_20201103_00:48:25