Configure File System Server Configuration page - Redundant K2 SAN server B
This page checks on the
configuration of the K2 Media Server in one of its main roles as a file system
server. The K2 Media Server also functions as a file system client, which is
also checked from this page. It is not necessary to bind RANKs or create a file
system, since this task was completed when you configured the previous K2 Media
Server.
- If desired, configure reference file generation.
- Click Check.
- Confirm a “… file copied…” message.
- When the wizard reports that the configuration is correct, click Next.
- Confirm messages about copying the file system configuration file to the other server. If you get a “The V: will not be available until this device is rebooted…” message, you can safely continue now and reboot later when instructed to do so.