Configure SNFS LAN Gateway Server Configuration page - Redundant K2 SAN server B

This page manages the LAN Gateway adapter and the Fibre Channel connection to the RAID storage. You configure network settings on the LAN Gateway adapter and the page validates that the Fibre Channel adapter is in place and that the media RANKs are visible.

  1. Select Backup.
  2. Select a port to act as the LAN Gateway adapter and click Select Gateway.

    The selected port name displays for LAN Gateway adapter.

  3. Click Check. The Validation Report opens.

  4. Confirm that the LAN Gateway configuration is successful.
  5. Close the Validation Report.
  6. Click Next.

The Database Server Configuration page opens.


Copyright © 2005 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. K2 Summit 10.1.4 gvtp_20201103_00:48:25