Configure FTP Server Configuration page - Redundant K2 SAN NH server

This page appears only if the server has the role of FTP server.

Do not modify these settings. Leave at default values of Max FTP streams = 4, FTP Data Socket Timeout = 60, and FTP Port = 21. Only qualified Grass Valley personnel should specify other values, as these settings are intended for use only with custom systems designed by Grass Valley.

  1. Select MXF export type as follows:
    • 377M: SMPTE ST 377:2004 compliant. Ensures compatibility with older products.
    • 377-1: SMPTE ST 377-1:2009 compliant.
    • ARD and 377-1: ARD is only for AVC-Intra Class 100 (720p and 1080i PAL only) and XDCAMHD-422 (1080i PAL only).
    Refer to related topics in the "Configuring the K2 System" section of this Topic Library for more information.
  2. Click Next. The Completing the Configuration Wizard page opens.
  3. Click Finish. The wizard closes. The server restarts.

Wait until all startup processes have completed before continuing.

If you have other NH servers, configure them similarly. Then check the V: drive on each of your NH servers.


Copyright © 2005 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. K2 Summit 10.1.4 gvtp_20201103_00:48:25