Unbind RANK
Unbinding reverses the bind process. Unbinding might be needed when
reconfiguring a SAN.
CAUTION:
Unbinding destroys all data stored on disk modules
- In the tree view, right-click the RANK and select Unbind.
-
When warning messages appear “…destroy all existing media…” and
“Are you sure?”, click
OK to continue. The Unbind dialog box opens.
-
Verify that the RANK or RANKs you intend to unbind is in the
Selected box. If not, select RANKs and click the arrow buttons until the RANKs
you intend to bind are in the Selected box and the RANKs you do not intend to
unbind are in the Available box.
Note: As an aid in identifying a disk module’s physical location, select it in the Selected Disks list, then click Identify Disks. This causes the disk drive LED to flash.
- Click OK to close the Unbind dialog box and begin the unbinding process. The Progress Report dialog box opens, showing the status of the unbinding process.
- When progress reports 100% complete, the RANK is unbound.
- Restart the K2 Media Server.