Power LED

The Power LED indicates status as follows::
LED behavior Status Condition
Off The standby switch is set to Off and the K2 Summit system is not operational.
Green steady on The standby switch is set to On and the K2 Summit system is either in the startup process or has completed the startup process and is operational.
DANGER
The power standby switch does not turn off power to the system. To turn power off both power supplies must be disconnected from the power source.

Copyright © 2005 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. K2 Summit 10.1.4 gvtp_20201103_00:48:25