LTC Input/Output
The K2 Summit system system specification
is shown in the following table:
| Parameter | Specification |
|---|---|
| Standard | SMPTE 12M Longitudinal Time Code, AC coupled, differential input |
| Number of Inputs | 1 per video input - Shared 6 pin conn. with output |
| Number of Outputs | 1 per video output |
| Input Impedance | 1K ohm |
| Output Impedance | 110 ohm |
| Minimum Input Voltage | 0.1 V peak-to-peak, differential |
| Maximum Input Voltage | 2.5 V peak-to-peak, differential |
| Nominal Output Voltage | 2.0 V peak-to-peak differential. |
| LTC Reader | LTC reader will accept LTC at rates between 1/30 and 80 times the nominal rate in either forward or reverse directions. |
| LTC Transmitter | LTC transmitter outputs LTC at the nominal frame rate for the selected standard at 1x speed, forward direction only. |