Serial Digital Video (SDI)

The K2 Summit system system specification is shown in the following table
Parameter Specification
Video Standard SD: 525 Line or 625 Line component

HD: 720p or 1080i

Number of Inputs 1 per channel standard. 2 or 3 per channel when licensed for ChannelFlex Suite.
Number of Outputs 2 per channel
Data format Conforms to SMPTE 259M (SD) and 292M (HD)
Number of bits 10bits
Embedded Audio Input SD data format conforms to SMPTE 259M (48kHz, 20bits)

HD data format conforms to SMPTE 299

48 kHz (locked to video) and 16- or 24- bit PCM

Compatible with AC-3 and Dolby-E

Embedded Audio Output Output data format is 48 kHz 24-bit

User can disable embedded audio on SDI output

Connector BNC, 75 ohm, No loop-through
nominal Amplitude 800mV peak-to-peak terminated
DC Offset 0 +0.5V
Rise and Fall Times SD: 400 - 1500ps; measured at the 20% and 80% amplitude points

HD: less than 270ps

Jitter less than 0.2UI peak-to-peak
Max Cable Length SD 300 meters

HD 125 meters

Return Loss greater than or equal to 15db, 5Mhz to 1.485Ghz

Copyright © 2005 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. K2 Summit 10.1.4 gvtp_20201103_00:48:25