Storage Utility for standalone K2 Summit system

There are two versions of Storage Utility:
  • Storage Utility for the K2 SAN
  • Storage Utility for stand-alone K2 systems

This manual explains Storage Utility for stand-alone K2 Summit system. Refer to the K2 SAN Installation and Service Manual to learn about Storage Utility for the K2 SAN.

Note: For shared storage, run Storage Utility only via the K2Config application.

The Storage Utility is your primary access to the media file system, the media database, and the media disks of the K2 Summit system for configuration, maintenance, and repair. It is launched from the K2 AppCenter application.

CAUTION:
Use the Storage Utility only as directed by a documented procedure or by Grass Valley Support. If used improperly, the Storage Utility can render your K2 system inoperable or result in the loss of all your media.
Note: Do not use the MegaRAID utility on a K2 system. This utility is for use by qualified Grass Valley Service personnel only. When this utility is opened it scans the SCSI bus and interferes with record and play operations.

Copyright © 2005 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. K2 Summit 10.1.4 gvtp_20201103_00:48:25