RAID drive numbering K2 Summit 3G system
In the K2 Summit 3G system, internal RAID drives are numbered as follows. This numbering is displayed in Storage Utility.
Drives are configured as RAID 1.
| Drive numbering | Explanation |
|---|---|
| Disk 0 | These two RAID drives make up LUN 0. |
| Disk 1 | |
| Disk 2 | These two RAID drives make up LUN 1. |
| Disk 3 | |
| Disk 4 | These two RAID drives make up LUN 2. |
| Disk 5 | |
| Disk 6 | These two RAID drives make up LUN 3. |
| Disk 7 | |
| Disk 8 | These two RAID drives make up LUN 4. |
| Disk 9 | |
| Disk 10 | These two RAID drives make up LUN 5. |
| Disk 11 |
For configurations with eight drives, slots 0 - 3 and slots 6- 9 are populated.