Type
|
If licensed for AppCenter Elite you
can configure the channel to be a ChannelFlex Suite Channel. When you do so,
settings change accordingly.
|
Name
|
If desired, enter a name for the
channel.
|
Video Output
|
NTSC or PAL available depending on
video reference standard setting.
|
Aspect ratio
|
Select a HD or SD format.
|
Aspect ratio
conversion
|
Select the conversion option. Refer to
topics about aspect ratio conversions.
|
Still-play mode
|
Determines how to generate the
still-play signal for the play channel when it is setup to freeze on last frame
of video in stop mode. You can select the following:
- Field
(interpolated): This is the default setting and uses the content of
one field for both fields during still-play for a one field freeze. This mode
eliminates the motion jitter that can be present in Interlaced mode.
- Frame
(interlaced): This mode displays two fields in still play mode for
a two field freeze. With this mode you might see some motion jitter in
still-play.
|
Test Mode (Colorbars +
Tone)
|
Temporarily displays 75% colorbar
signal on the channel output. It also generates an audio tone on all audio
outputs. This setting is for test purposes only, so it is not saved.
|
Video Output
Timing
|
Delays the video output.
|
Ancillary data timecode
output
|
If 720p or 1080i selected, inserts the
recorded timecode track as ancillary timecode on playout. Overrides any
ancillary timecode packets stored on data track. Refer to specifications about
data track support.
|
VITC output
generator
|
If SD is selected, you can select VITC
lines.
|
AFD Settings
|
Defines AFD in clips output from the
K2 Summit system. You can select the
following:
- Record AFD as clip
property:
- Yes –
When an AFD setting is present it is set as the default in clip properties.
This is the default K2 system behavior.
- No –
When an AFD setting is present it is not set in clip properties.
- Generate AFD on
Output:
- Always –
As automatically determined by the K2 system.
- When
Known – As set in clip properties.
- Never –
Pass-through any AFD already present.
- SD 16:9 Full screen
up-conversion AFD: Select AFD code1010 or 1001, as required by your
site's downstream processing. This does not affect the visual display at the K2
system output.
|
Motion Smoothing |
Select Motion Smoothing during 3xSSM and 6xSSM for
off-speed play of 1080i output. Turning this feature on will
smooth the picture and reduce jitter. |