Reorder adapters

  • Adapters must be named correctly
  • The control team must be created
  • The team and loopback must be named
  1. If not already open, open Network Connections as follows:
    1. Open the Windows Network and Sharing Center control panel.
    2. Click Change Adapter Settings. Network Connections opens.
  2. Select Advanced, then Advanced Settings…
  3. On the Adapters and Bindings tab, order adapters as follows:
    • On a Dell system with four adapters only, the specified order is as follows
      Control Connection
      FTP-Streaming Connection
      Unused Connection 1
      Unused Connection 2
    • On a Dell system with four adapters and a 10 Gig network interface card installed, the specified order is as follows
      Control Connection
      FTP 10G Connection
      Unused Connection 1
      Unused Connection 2
      Unused Connection 3 10G
  4. Click OK to close and accept the changes.
  5. Close Network Connections.

If continuing with network configuration, next set power management settings.


Copyright © 2005 - 2020 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. K2 Summit 10.1.4 gvtp_20201103_00:48:25