Configuring 4K Channels on the K2 Summit system

This feature is part of the ChannelFlex Suite.

The following licenses must be installed:

K2-APPCENTER-ELITE license
K2-XDP-2HDL
K2-XDP2-AVC-2CH
K2-XDP2-3G-2CH 1080p licenses (two required to work with DynoZoom, if not only one is required)
K2-XDP2-UHDTV1 4K licenses (two required to work with DynoZoom, if not only one is required)

Note: On a K2 Summit system that supports DynoZoom, the DynoZoom board in the K2 Summit system and the DynoZoom Frame must be connected via PCIe and the DynoZoom Frame must be powered on before the K2 Summit system is powered on.

Open Configuration Manager and click Channel.
Select C1.
For Type, select 4K Recorder (Top). Only those settings supported by a 4K Recorder channel are displayed.
Note: If you have the AppCenter Elite license yet the 4K Recorder option does not appear, it means you do not have the 1080p license and the 4K license, which are also required.
When you set C1 to 4K Recorder (Top), C2 is automatically set to 4K Recorder (Bottom). No settings are available for configuration on C2, because they are automatically configured, dependent on C1 settings.
For Live network streaming, select No.
If desired, assign a name to the channel.
Select C3.
For Type, select 4K Player (Top). Only those settings supported by a 4K Player channel are displayed. When you set C3 to 4K Player (Top), C4 is automatically set to 4K Player (Bottom). No settings are available for configuration on C4, because they are automatically configured, dependent on C3 settings.
For Live network streaming, select Yes.
If desired, assign a name to the channel.
Save settings and close.