To follow cabling instructions

The K2 10Gv2 SAN, and its K2 10Gv2 RAID storage, is documented in this manual. The K2 10Gv2 SAN is defined as follows: The K2 SAN with 8 Gig Fibre Channel and 10 Gig iSCSI connections. Includes support for 2.5 inch drives and large capacity drives. Introduced in late 2012. The K2 10Gv2 SAN requires K2 software version 9.0 and higher. Some devices and/or systems used with older K2 SANs are not compatible with the K2 10Gv2 SAN. Consult the "About This Release" section of the K2 Topic Library for compatibility information.

To follow cabling instructions for your K2™ Storage Area Network (SAN) or direct-connect storage K2 Summit system, do the following:

  1. Find the system cabling diagram that matches your K2 system.
  2. Follow the references below the system diagram to locate cabling instructions for the individual devices of your K2 system.

Refer to the the "Installing and Servicing the K2 SAN" section of the K2 Topic Library for more information on K2 SANs and devices. Refer to the the "Configuring the K2 System" section of this Topic Library for more information on direct-connect K2 client storage.


Copyright © 2014 Grass Valley. All rights reserved. K2 Summit 9.3 gvtp_20140914_19:56:32